Skip to main content

Back to the Future's Best Scenes

2011 Motion 427 & 454 Camaros





Baldwin-Motion's Joel Rosen partners with DeNooyer Chevrolet's Performance Division and Redline Motorsports to build and market 2011 MOTION 427 and 454 Camaros.

More than 40 years ago Joel "Mr. Motion" Rosen, a young Brooklyn dynotuner, hot rodder, street racer and national record holding drag racer, turned a simple 427 Camaro engine swap into an empire. And catapulted Baldwin-Motion and MOTION into internationally respected performance brands. Working with Baldwin Chevrolet, he was the most prolific builder-marketer of modified new big-block Chevys during the Supercar ‘60s & ‘70s. He backed up Phase III models with written moneyback performance warranties! He’s now passing the torch to Howard Tanner, a young dyno-tuning specialist and speed shop owner.
“It’s Déjà Vu all over again,” said Joel Rosen, quoting the legendary Yankee, Yogi Berra. “We have re-launched the Baldwin-Motion and MOTION brands again, this time capturing the true spirit of what we did in 1967- 1974: Market built-to-order, dyno-proven and warranted SS & Phase III 427 & 454 Camaros, crafted by a high-tech dyno shop and available exclusively from a single authorized Chevrolet dealer.”
Specially prepared 427 and 454 engines power the latest iterations of the legendary Baldwin-Motion Fantastic Five : 2011 SS & Phase III Camaros, dyno-rated at 525 (SS-427) to 800 horsepower (427-SC Supercar). Howard Tanner is President of Redline Motorsports, a speed shop specializing in fuel-injected vehicles in Schenectady, NY. He and his team are the builders. Dan Carlton, General Manager, DeNooyer Chevrolet’s Performance Division in Albany, NY is handling client contact.
DeNooyer Chevrolet, owned by second-generation Chevrolet dealer Jim DeNooyer, is the highest volume Chevrolet dealership in upstate New York. As a young, hands-on car guy, DeNooyer was into hot rods, customs and drag racing. He later moved up into fast boats and has held speed records since the 1990s. Sons, Joel and Tom, also highperformance enthusiasts, handle day-to-day operations.
“It’s great that the folks at DeNooyer Chevrolet and Redline Motorsports have embraced the Baldwin-Motion heritage of using the latest GM 427 and 454 high-performance factory engines in their new MOTION Camaros,” said Dr. Jamie Meyer, Product Integration Manager, General Motors Performance Parts.
Tanner is a highly skilled engine calibrator and dyno-tuner as well as an experienced builder of large-displacement GM vehicles, including Camaros and Corvettes. Carlton, a respected racer, successful GM of luxury brand dealerships and former Chevrolet dealership principal, has years of experience selling both imported and domestic high-performance vehicles. He is a former New York State Ice Racing Champion and currently competes in sports car, ice racing and Modified motorsports.
Every MOTION Camaro will be built to order at Redline and tuned by Howard Tanner on its DYNOmite 1,400 horsepower Eddy Current Load dyno. A full dyno report as well as official Baldwin-Motion documentation will go with each car.
Sanctioned, serialized and signed by Joel Rosen, each 2011 MOTION SS & Phase III Camaro will be delivered with custom MOTION VIN plates and complete documentation. To prevent future cloning of MOTION Camaros, Rosen and Carlton will be establishing a confidential MOTION Registry detailing VINs, vehicle specifications and original purchaser data.
In 1967-1968, Baldwin-Motion marketed its full line of 427 Chevys under The Fantastic Five banner. Advertising and marketing materials, as well the windows at Baldwin Chevrolet, screamed The Fantastic Five . And, that’s how they’re launching the new line of 2011 MOTION Camaros.
“I like to think of our 2011 SS and Phase III 427 & 454 Camaros as “modern MOTION mythmakers!” said, DeNooyer’s Carlton.


STANDARD EQUIPMENT SPECIFICATIONS

MOTION SS-427 CAMARO
525 HORSEPOWER

  • GM LS7 427 Aluminum Engine
  • 7,000-RPM Redline
  • Unique 4.125-inch bore block, pressed-in liners
  • Cast Aluminum 11.0-to-1 flat-top pistons
  • Titanium connecting rods.
  • Forged steel 4.00-inch stroke crankshaft
  • Race-prepped CNC-ported Aluminum heads
  • Titanium intake; Sodium-filled exhaust valves
  • ATI/Redline damper
  • Six-Speed manual transmission
  • Paddle-shift 6L80E automatic (OPTIONAL)
  • Z06 Corvette clutch
  • American Racing High-Efficiency tubular exhaust system
  • MBRP Stainless Steel mufflers
  • High -Flow air intake system
  • 160-degree High-Flow thermostat
  • Custom calibrated Engine Management System
  • MGW short throw shifter
  • GM wheels
  • Custom painted MOTION graphics
  • Perforated seat inserts
  • Custom embroidered headrests
  • MOTION badges & VIN plates
  • 3-Year/36,000-Mile Warranty

MOTION PHASE III 427 CAMARO
600 HORSEPOWER

  • GM LS7 427 Aluminum Engine
  • 7,000-RPM redline
  • Unique block, 4.125-inch bore, pressed-in liners
  • Cast Aluminum 11.0-to-1 flat-top pistons
  • Titanium connecting rods
  • 4.00-inch stroke crankshaft
  • Race-prepped CNC-ported Aluminum heads
  • Custom Redline R3 camshaft
  • Titanium intake; Sodium-filled exhaust valves
  • HD dual valve springs with Titanium retainers, locks & keepers
  • FAST 102-mm LSX-R 102-mm intake manifold
  • American Racing High-Efficiency tubular exhaust system
  • ATI/Redline damper
  • Six-Speed manual transmission
  • Paddle-shift 6L80E automatic (OPTIONAL)
  • Z06 Corvette clutch
  • MBRP Stainless Steel mufflers
  • High-Capacity air intake system
  • 160-degree high-flow thermostat
  • Relocated heater hoses, fuel lines, evap. & tb.
  • Custom calibrated Engine Management system
  • Custom Powder-Coated valve covers with coil relocation
  • MGW short throw shifter
  • Custom painted MOTION graphics
  • Custom MOTION wheels (stock size tires)
  • Custom Phase III Hood with Heat Extractors
  • Phase III Eliminator Rear Spoiler
  • MOTION badges & VIN plates
  • Carbon-Fiber-look seat inserts
  • Custom embroidered headrests
  • Accented shifter boot; center compartment lid
  • MOTION floor mats
  • 2-Year/24,000-Mile Warranty

MOTION SS-454 CAMARO
550 HORSEPOWER

  • GM LSX 454 Engine
  • Bore: 4.185-inch; Stroke: 4.125-inch
  • Cast-Iron block, six-bolt cross-bolted mains
  • Forged Aluminum 11.0-to-1 pistons
  • Steel connecting rods
  • Forged 4340 Steel crankshaft
  • Aluminum (production) LS7 cylinder heads
  • Corvette Z06 LS7 intake manifold
  • Redline Stage 1 hydraulic roller camshaft
  • Titanium intake; Sodium-filled exhaust valves
  • American Racing High-Efficiency tubular exhaust system
  • MBRP Stainless Steel mufflers
  • ATI/Redline damper
  • Six-Speed manual transmission
  • Paddle-shift 6L80E automatic (OPTIONAL)
  • Z06 Corvette clutch
  • High Capacity air intake system
  • 160-degree high-flow thermostat
  • Custom calibrated Engine Management System
  • 454 LSX valve covers
  • MGW short throw shifter
  • Custom painted MOTION graphics
  • GM wheels
  • MOTION badges & VIN plates
  • Perforated seat inserts, embroidered headrests
  • MOTION floor mats
  • 3-Year/36,000-Mile Warranty

MOTION PHASE III 454 CAMARO
625 HORSEPOWER (TORQUE MONSTER!)

  • GM LSX 454 Engine
  • Bore: 4.185-inch; Stroke: 4.125-inch
  • Cast-Iron block, six-bolt cross-bolted mains
  • Forged Aluminum 11.0-to-1 pistons
  • Steel connecting rods
  • Forged 4340 Steel crankshaft
  • Race-prepped CNC-ported LS7 Aluminum heads
  • Redline Stage 3R hydraulic roller camshaft
  • Titanium intake; Sodium-filled exhaust valves
  • FAST 102-mm LSX-R intake manifold
  • American Racing High-Efficiency tubular exhaust system
  • MBRP Stainless Steel mufflers
  • ATI/Redline damper
  • High-Capacity air intake system
  • 160-degree high-flow thermostat
  • Custom calibrated Engine Management System
  • 454 LSX valve covers
  • Six-Speed manual transmission (ONLY)
  • Z06 Corvette clutch
  • MGW short throw shifter
  • Custom painted MOTION graphics
  • Custom MOTION wheels (stock size tires)
  • Custom Phase III Hood with Heat Extractors
  • Custom Phase III 454 Rear Spoiler
  • MOTION badges & VIN plates
  • Custom Carbon-Fiber-look seat inserts
  • Custom embroidered headrests
  • MOTION floor mats
  • Solid rear cradle; Poly differential bushings
  • 2-Year//24,000-Mile Warranty

MOTION PHASE III 427-SC CAMARO SUPERCAR
800 HORSEPOWER SUPERCHARGED

  • Supercharged GM LS7 427 Aluminum Engine
  • 2.8-Liter Twin-Screw Supercharger System
  • Eight-Rib supercharger drive assembly
  • Unique block, 4.125-inch bore, pressed-in liners
  • Forged 2618 Aluminum 9.3-to-1 pistons
  • Forged 6.125-inch H-Beam Steel connecting rods
  • Forged 4.00-inch stroke steel crankshaft
  • Race-prepped CNC-ported Aluminum heads
  • Custom Redline R3-SC Blower camshaft
  • ATI/Redline damper
  • American Racing High-Efficiency tubular exhaust system
  • MBRP Stainless Steel mufflers, dual outlets
  • High-Capacity air intake system
  • 160-degree high-flow thermostat
  • Custom calibrated Engine Management System
  • High-Capacity fuel system
  • Upgraded TR6060 Six-Speed manual transmission (ONLY)
  • ZR1 Corvette dual disc clutch system
  • MGW short throw shifter
  • 1,000 Horsepower axles
  • Pfadt Billet rear cradle mounts
  • Pfadt differential bushings
  • Pfadt trailing arms & tie rods
  • Pfadt Coil-Over F&R Suspension
  • Pfadt F&R sway bars
  • Brembo Six-Piston Monoblock front brakes with 380-mm two-piece rotors
  • Brembo Four-Piston Monoblock rear brakes with 380-mm two-piece rotors
  • Custom MOTION painted striping
  • Custom MOTION wheels with painted accents
  • Custom Phase III-SC Hood with glass window
  • Aggressive front fascia with air intake inlets
  • Phase III-SC Rear Spoiler
  • MOTION badges & VIN plates
  • Accented front and rear seats with embroidered headrests with Carbon Fiber finish
  • 1-Year/12,000-Mile Warranty

Comments

Popular posts from this blog

Cute girl drifting in rally car unfastened

【中継】日産モータースポーツファンイベント

World’s Best EV Crossover? Volvo EX30 Vs EVERY Rival

The All-New 2019 BMW X5 Sports Activity Vehicle.

Here we go again.This time official Today, BMW launches the all-new 4th generation 2019 BMW X5 Sports Activity Vehicle with two variants, the X5 xDrive 40i and the X5 xDrive 50i. Since its introduction almost 20 years ago, the BMW X5 has been built exclusively in Spartanburg, SC. To date, more than 2.2 million X5’s have been sold worldwide, one third of those sales being in the U.S. The all-new 2019 BMW X5 will again be built at BMW Plant Spartanburg, SC. This center of competence for BMW X models also handles production of the BMW X3, BMW X4, BMW X6 and will soon add the BMW X7. New design language exudes confidence and authority. A wheelbase that is 1.6 inches longer than its predecessor’s, a 1.1 inches increase in vehicle length, an extra 2.6 inches of width and a 1.0 inches increase in height give the all-new 2019 BMW X5 both a muscular appearance and a more generous level of space for passengers and their luggage. The latest X5 retains the hallma

All NEW 2025 Chevrolet Corvette Zora Revealed! First Look Will Shock YOU!

Lee Greenwood - God Bless The U.S.A.

GM's Missed Opportunity: Buick Conceives a Gorgeous Two-Seater, Mid-Engi...

Teaser: Opulent Velocity | Cadillac Concept

Artura Spider: All the Exhilarating Details

Labels

Show more