Skip to main content

Back to the Future's Best Scenes

Ferrari FXX K | PR+WG

Ferrari FXX K
Maranello, 3rd December 2014 – Ferrari’s new FXX K research and development programme receives its world premiere next weekend at the Yas Marina Circuit in Abu Dhabi. The laboratory-car is based on Maranello’s first hybrid model and will grace the world’s tracks from next year onwards. The K in its moniker is a reference to the “KERS” kinetic energy recovery system it adopts in maximising its track performance.
Ferrari FXX K
Unfettered by homologation and racing regulations, the FXX K will never be used in competition. It was, in fact, developed to be completely uncompromising, incorporating technological innovations that will guarantee an unprecedented driving experience to the exclusive group of Client-Test Drivers with whom the Prancing Horse will roll out a test programme over the coming two years.
Ferrari FXX K
The car’s enormous potential is attested to by two significant figures:  a total power output of 1050 cv (860 cv delivered by its conventional V12 engine and 190 by its electric motor) and maximum torque in excess of 900 Nm.
The FXX K’s 6262 cc V12 features new camshafts and a modified valve train with mechanical rather than hydraulic tappets. The intake manifolds have been redesigned and given a special type of polishing treatment. The exhaust system has been modified as its silencers have been eliminated.
Ferrari FXX KFerrari FXX K
The HY-KERS system has been evolved specifically for pure performance with the result that the driver can control the function logics from the specific 4-setting Manettino on the centre console: Qualify, for maximum performance within a limited number of laps; Long Run to optimise performance consistency; Manual Boost for instant maximum torque delivery; and Fast Charge, for a fast recharge of the car’s battery. 
A focus on delivering maximum efficiency at every stage of every track lap has resulted in extensive but integrated work on the entire car body in terms of both active and passive aerodynamics.  
The front of the car is dominated by a twin-profile spoiler and a larger splitter, which is 30 mm lower, with a gap in its centre. This design is an application of the concepts developed to improve aero balance in the GT category of the WEC, which Ferrari has won for three consecutive years.  Two pairs of vertical elements, an endplate and, externally, a dive plane, together with vertical fins channel the air towards the car’s flanks, generating a longitudinal vortex that creates a localised depression. This in turn sucks the wake from the wheels to the outside of the aerodynamic underbody. Along with the side skirts that extend out from the sills, the vortex helps isolate the airflow from the underbody to boost its efficiency.
Ferrari FXX K
The solutions on the rear of the car are highly sophisticated, too. The tail section is now higher and the mobile spoiler extends further for a total increase in extension of 60mm when fully deployed. A vertical fin and a small wing each side of the tail act as guide vanes in the low drag configuration and boost the spoiler’s efficiency in the high downforce one. This system also creates considerable downforce at the rear of the car, allowing the use of an extreme diffusion volume for the rear diffuser which optimises air extraction from the underbody.  The section of the flat underbody just ahead of the rear wheels is also exploited to the full to generate downforce thanks to the reduced pressure in the wheel arch guaranteed by the direct connection to the rear of the car by a by-pass duct.
The result is a 50% improvement in downforce in the low drag configuration and a 30% improvement in the more aggressive downforce configuration, resulting in a figure of 540 kg at 200 km/h.
Vehicle dynamics are further improved by the adoption of Pirelli slicks complete with sensors that monitor longitudinal, lateral and radial acceleration, as well as temperature and pressure. This ensures an accurate analysis of the interaction between the tyre and track surface, providing even more vital data to enable the traction control system to guarantee maximum performance.
The intervention level of the E-Diff electronic differential, F1-Trac traction control, Racing SSC (Side Slip Angle Control) - now specially calibrated to suit the car’s slick tyres - and the high-performance ABS can be controlled using the five-position Manettino on the steering wheel.
TECHNICAL SPECIFICATIONS
FXX K
KERS system
Total maximum power1050 cv
Total maximum torque>900 Nm
V12 maximum power*860 cv @ 9200 rpm
Maximum revs9250 rpm
V12 maximum torque750 Nm @ 6500 rpm
Electric motor output140 Kw (190 cv)
ICE
Type65-deg. V12
Bore and stroke94 x 75.2 mm
Total displacement6262 cc
Specific power137 cv/l
Dimensions
Length4896 mm
Width2051 mm
Height1116 mm
Wheelbase2650 mm
Gearbox
7-speed DCT
Suspension
Frontdouble wishbones
Rearmulti-link
Tyres (Pirelli P-Zero slicks with sensors)
Front285/650 - R19 x10.5
Rear345/725 - R20x13
Carbon ceramic brakes (Brembo)
Front398 x 223 x 36 mm
Rear380 x 253 x 34 mm
Electronic controls
ESCstability control
High perf ABS/EBDPerformance anti-lock system/electronic brake balance
EF1-TracF1 electronic traction control integrated with the hybrid system
E-Diff 3third generation electronic differential
SCM-E Frsmagnetorheological damping with twin solenoids (Al-Ni tube)
Aerodynamicsactive
* with dynamic ram effect

Comments

Popular posts from this blog

Cute girl drifting in rally car unfastened

【中継】日産モータースポーツファンイベント

World’s Best EV Crossover? Volvo EX30 Vs EVERY Rival

The All-New 2019 BMW X5 Sports Activity Vehicle.

Here we go again.This time official Today, BMW launches the all-new 4th generation 2019 BMW X5 Sports Activity Vehicle with two variants, the X5 xDrive 40i and the X5 xDrive 50i. Since its introduction almost 20 years ago, the BMW X5 has been built exclusively in Spartanburg, SC. To date, more than 2.2 million X5’s have been sold worldwide, one third of those sales being in the U.S. The all-new 2019 BMW X5 will again be built at BMW Plant Spartanburg, SC. This center of competence for BMW X models also handles production of the BMW X3, BMW X4, BMW X6 and will soon add the BMW X7. New design language exudes confidence and authority. A wheelbase that is 1.6 inches longer than its predecessor’s, a 1.1 inches increase in vehicle length, an extra 2.6 inches of width and a 1.0 inches increase in height give the all-new 2019 BMW X5 both a muscular appearance and a more generous level of space for passengers and their luggage. The latest X5 retains the hallma

All NEW 2025 Chevrolet Corvette Zora Revealed! First Look Will Shock YOU!

Lee Greenwood - God Bless The U.S.A.

GM's Missed Opportunity: Buick Conceives a Gorgeous Two-Seater, Mid-Engi...

Teaser: Opulent Velocity | Cadillac Concept

Artura Spider: All the Exhilarating Details

Labels

Show more